新聞中心
新聞資訊
聯系我們
山東途暢路橋工程有限公司
聯系人：石總
電話：18264104888
地址：山東省濟南市槐蔭區經一路273號群盛華城
你不知道的壓路機選型要點
來源：http://www.toppersin.com/ 日期：2024-04-11 發布人：
壓路機選的好，不僅可以提升工程的建設質量和施工進度，發揮設備的配套能力和降低成本，更能夠保障機友的終收益。所以壓路機不能盲目選擇
Choosing a good roller not only improves the construction quality and progress of the project, but also maximizes the supporting capacity of the equipment and reduces costs. It can also ensure the ultimate benefits of the roller users. So road rollers cannot be blindly selected
1、根據土壤結構選擇
1. Select based on soil structure
一般情況下，輪胎驅動單鋼輪振動壓路機適宜碾壓非粘性材料如礫石、碎石、砂石混合料、砂性土壤等；雙鋼輪振動壓路機則適合于壓實瀝青砼、砂石混合料和干硬性水泥砼，是高等級公路、市政道路、停車場和工業場地等的通用施工設備。
In general, tire driven single steel wheel vibratory rollers are suitable for rolling non cohesive materials such as gravel, crushed stones, sand gravel mixtures, sandy soils, etc; The double steel wheel vibration roller is suitable for compacting asphalt concrete, sand and gravel mixtures, and dry hard cement concrete. It is a universal construction equipment for high-grade highways, municipal roads, parking lots, and industrial sites.
而兩輪光輪靜碾壓路機適合碾壓細土顆粒、砂土、砂石混合料及瀝青砼材料；三輪光輪靜碾壓路機由于自重較重，且對路面具有“熨斗”效應，可以使路基和瀝青路面光滑平整，因此適合各種粘性、非粘性材料的終壓實；
The two wheeled smooth wheel static roller is suitable for rolling fine soil particles, sand, sand and gravel mixtures, and asphalt concrete materials; The three wheeled smooth wheel static roller, due to its heavy self weight and the "iron" effect on the road surface, can make the roadbed and asphalt pavement smooth and flat, making it suitable for the final compaction of various sticky and non sticky materials;
凸塊振動壓路機在振動壓實時可產生極高的線載荷，不但可以碾壓非粘性土壤，而且特別適合碾壓粘性土壤，是高速公路、礦山道路和大型堤壩等工程中基礎壓實的理想設備。
The convex block vibration roller can generate extremely high line load during vibration compaction, which can not only roll non cohesive soil, but also is particularly suitable for rolling cohesive soil. It is an ideal equipment for foundation compaction in engineering projects such as highways, mining roads, and large embankments.
2、根據施工要求選擇
2. Select according to construction requirements
通常情況下相同噸位的壓路機，振動碾壓壓路機的碾壓厚度和效率是靜碾壓壓路機的2~3倍，為了有效提高施工進度，一些高寒時間較長、施工季節較短的地區應考慮選擇振動壓路機；而在山區公路或山體土壤疏松的工作場地施工宜選用靜碾壓壓路機
Under normal circumstances, for rollers of the same tonnage, the rolling thickness and efficiency of a vibrating roller are 2-3 times that of a static roller. In order to effectively improve construction progress, some areas with longer cold periods and shorter construction seasons should consider choosing a vibrating roller; In mountainous roads or workplaces with loose soil, it is advisable to use static roller compaction machines for construction
下一篇：瀝青路面養護為什么要使用冷再生機？ 上一篇：舊瀝青路面冷再生機械如何進行施工？
閱讀/ Recommended reading
- 冷再生機租賃：“冷再生”技術助推綠色發展 2025-12-11
- 冷再生機租賃：公路基層全深式就地冷再生施工技術研究 2025-12-10
- 冷再生機租賃：冷在生技術助力道路經濟快速恢復交通 2025-12-09
- 冷再生機租賃：乳化瀝青與泡沫瀝青冷再生技術發展 2025-12-06
冷再生機租賃：瀝青路面就地冷再生施工技術分析
[2025-12-12]
引言隨著我國社會經濟的持續發展，社會對于公路交通系統的需求也在持續增長，其一方面推動了公路交通網絡建設的持續推進，另一方面也使得公路質量及要求不斷提升。瀝青路面作為我國公路常...
