新聞中心
新聞資訊
聯系我們
山東途暢路橋工程有限公司
聯系人：石總
電話：18264104888
地址：山東省濟南市槐蔭區經一路273號群盛華城
就地冷再生機的雙重作用
來源：http://www.toppersin.com/ 日期：2021-11-30 發布人：
冷再生的工作寬度為3.8 m，再生深度在0-150 mm之間，配有708 KW高性能發動機，確保再生。該設備既能采用普通的銑刨工藝，冷再生機又能采用維特根研發的下切工藝進行施工。配上輸送帶后，用下切刨刨法所得的混合料，經后送后端的瀝青攤鋪機，并及時均勻攤鋪。
The working width of cold regeneration is 3.8 m, the regeneration depth is between 0-150 mm, equipped with 708 KW high performance engine to ensure efficient regeneration. The equipment can be used for both conventional milling and regeneration using a cutting process developed by Wittgen. After the conveyor belt is fitted, the mixture obtained by the cutting and planing method is sent to the asphalt paver at the back end and evenly spread in time.
The working width of cold regeneration is 3.8 m, the regeneration depth is between 0-150 mm, equipped with 708 KW high performance engine to ensure efficient regeneration. The equipment can be used for both conventional milling and regeneration using a cutting process developed by Wittgen. After the conveyor belt is fitted, the mixture obtained by the cutting and planing method is sent to the asphalt paver at the back end and evenly spread in time.
再生料寬度為3.8 m寬，可再生100 cm厚的瀝青混凝土層，整個工作寬度一次無縫再生一條車道，施工效率極高，與其配套的攤鋪機具有很大的材料輸送能力，因此原路面材料的不均勻性得以，并可鋪筑出良好的橫斷面
建筑下邊作業大大優化了材料的級配。
The width of the reclaimed material is 3.8 m wide, and the Tarmac layer of 100 cm thick can be regenerated. The entire working width can be regenerated one lane at a time without any gap. The construction efficiency is extremely high, and the paver matched with it has great material conveying capacity, therefore, the non-uniformity of the original pavement material can be eliminated, and good cross-section can be paved under the building to greatly optimize the material gradation.
The width of the reclaimed material is 3.8 m wide, and the Tarmac layer of 100 cm thick can be regenerated. The entire working width can be regenerated one lane at a time without any gap. The construction efficiency is extremely high, and the paver matched with it has great material conveying capacity, therefore, the non-uniformity of the original pavement material can be eliminated, and good cross-section can be paved under the building to greatly optimize the material gradation.
雙作用：即既能作為后出料，又可用作高性能銑刨機。
冷再生機能很好地平衡剛柔度，克服現有半剛性基層的缺陷，延緩路面的破損時間，逐步實現路面結構多樣性；該技術節約大量資源和資金，還能有利于和諧交通建設，促進交通事業的可持續發展，具有非常高的應用價值。
DOUBLE-ACTION: it can be used as both after-discharge and high-performance milling machine.
下一篇：制冷機負荷控制裝置的高輸出七大優勢 上一篇：當地冷再生機，打破產業格局需要技術突破
閱讀/ Recommended reading
- 冷再生機租賃：公路基層全深式就地冷再生施工技術研究 2025-12-10
- 冷再生機租賃：冷在生技術助力道路經濟快速恢復交通 2025-12-09
- 冷再生機租賃：乳化瀝青與泡沫瀝青冷再生技術發展 2025-12-06
- 冷再生機租賃：探索綠色養護新路徑，泡沫瀝青冷再生工藝 2025-12-08
冷再生機租賃：“冷再生”技術助推綠色發展
[2025-12-11]
冷再生技術在公路建設中的應用，相對于傳統的路面大修工藝技術，該技術具有原水泥路面舊材料100%完全利用、大幅度降低路面標高抬升幅度、大大縮短施工工期、環境污染小、交通影響小、...
